img img img img

Wed, Aug 10, 2022

How To Make A Smooth Mosaic Surface

 

Last Friday I was talking to one of our customers about how to make the a mosaic table with tiles of uneven thicknesses, which has prompted me to write this article. The easiest way to get a smooth surface is to choose tiles of the same thickness, but this can limit you in choice of materials. If you do use tiles of varying thicknesses then there are two techniques that you can use.

 

Technique 1:

This technique uses the direct method of mosaics, that is adhering your pieces directly onto the surface, and different adhesives to 'build up' the thickness of your tiles / tesserae.

Steps:

 

1. Select your tiles and tesserae and separate them into there varying thicknesses

 

select tiles of varying thicknesses

2. Lay your thickest tiles first, these will be your guide.


lay the thickest tiles first

 3. The thinner pieces are then built up in height using cement based adhesive. The back of the tile is buttered with the cement based adhesive and them pressed down onto the mosaic surface using a level (or press) to the height of the thickest piece. The level can be a piece of wood or tile. It should be straight and slightly larger in size than the area you are working on. A moderate pressure is applied to the level to press the pieces into the adhesive to the height of the thickest piece. How much cement based adhesive do I apply to the back of the tile? This will involve a bit of trial and error, too much adhesive and it will ooze out the sides requiring a clean up (with a small tool). Too little and the piece won't be correctly applied, requiring you to re-adhere the piece. 


buttering the backs of the tiles

Buttering the Backs of the Tiles

 

tiles ready to be pressed down

Tiles ready to be pressed down

 

tiles pressed down with a piece of mdf

Press tiles down with a piece of MDF

 

don't use too much cement based adhesive

Be careful not to use too much cement based adhesive

 

This exaples uses tiles of two different thicknesses, 4mm and 6mm.

 

 

Technique 2:

The second technique is the indirect method of mosaics. For detailed instructions on this method click here to go to our 'How To' article.

 

Mosaic table by Joanne Holmes

NEW ARRIVALS

VIEW ALL
img

Iridised Mixed Glass Rounds 1cm

$4.75
VIEW ALL
img

Iridised Green Glass Rounds 1cm

$4.75
VIEW ALL
img

Iridised Blue Glass Rounds 1cm

$4.75
VIEW ALL
img

Iridised Dark Blue Glass Rounds 1cm

$4.75
VIEW ALL