CREATE THIS BEAUTIFUL VINTAGE MOSAIC MIRROR

July 27, 2019

VINTAGE MOSAIC MIRROR KIT

This Beautiful Mosaic is created using our exclusive handmade mosaic tile. Here are the project instructions plus techniques for you to create this mosaic. Or if you prefer you can purchase this mosaic as a kit. 

Mosaic Kits are an easy way to get started in mosaics and a great gift idea. They are great for beginners as they are an easy introduction to the art of mosaic. Our starter kits contain everything you need to start you off on the voyage of discovery for the hidden mosaic artist hiding inside. Just click here to purchase your kit.

The tiles used in this project are made exclusively by The Mosaic Store. Each tile is printed at high temperatures with these stunning, colourful and intricate designs. These tiles are suitable for indoor use only as they will fade in direct sunlight.

Materials

Or purchase the complete 'Vintage Mosaic Mirror Kit'. 

 

Steps

1. Sealing the wooden base

This is an indoor project that is not suitable for areas where it will be exposed to moisture or water, as it is not waterproof. As wood is porous the mirror base needs to be sealed before tiling. A mixture of PVA adhesive & water can be used as the sealer in a ratio of 1 part adhesive to 4 parts water, apply two coats allowing each coat to dry thoroughly (30 minutes to 1 hour). Coat the area where you will be tiling by using a paint brush.

2. Tiling the Photo Frame

The adhesive can be applied either directly to the mirror base or painted individually onto the back of the tiles. By far the quickest method is to paint the adhesive onto the mirror base. When using this method apply to small sections at a time to avoid the adhesive drying out. When the tiles have been laid allow the adhesive to cure for 24 hours before applying the grout. Run you hand over the tiles to ensure they are all firmly adhered before grouting. If any are loose, remove them and re-adhere. 

3. Cutting the Tiles

To cut these tiles you can use a pair of Wheeled Nippers. If you haven't had experience cutting glass tiles, here are some tutorials to help you:

How to use wheeled nippers

How to cut glass tiles

Go to tools  >>> 

4. Grouting the Frame

This mosaic can be grouted as usual, no special techniques are required. If you need help with grouting click here to get detailed instructions.

This project is suitable for indoor use only and not in direct sunlight.

Vintage Mosaic Mirror Kit

 

Legal Disclaimer: No warranty is implied by these instructions. Use at your own risk. The Mosaic Store and its proprietors are not responsible for the results of any actions taken on the basis of this information, nor for any omission in the advice. Please wear appropriate safety equipment when cutting mosaic materials and using grouts and adhesives. Keep out of reach of children.

 


Leave a comment

Comments will be approved before showing up.

Subscribe