This Beautiful Mosaic is created using our exclusive handmade mosaic tile. Here are the project instructions plus techniques for you to create a mosaic in the same style.
1. Sealing the wooden base
This is an indoor project that is not suitable for areas where it will be exposed to moisture or water, as it is not waterproof. As wood is porous the base needs to be sealed before tiling. A mixture of PVA adhesive & water can be used as the sealer in a ratio of 1 part adhesive to 4 parts water, apply two coats allowing each coat to dry thoroughly (30 minutes to 1 hour). Coat the area where you will be tiling by using a paintbrush.
2. Tiling the Photo Frame
The adhesive can be applied either directly to the base or painted individually onto the back of the tiles. By far the quickest method is to paint the adhesive onto the base. When using this method apply to small sections at a time to avoid the adhesive drying out. When the tiles have been laid allow the adhesive to cure for 24 hours before applying the grout. Run your hand over the tiles to ensure they are all firmly adhered before grouting. If any are loose, remove them and re-adhere.
3. Cutting the Tiles
To cut these tiles you can use a pair of Wheeled Nippers. If you haven't had experience cutting glass tiles, here are some tutorials to help you:
4. Grouting the Frame
This mosaic can be grouted, as usual, no special techniques are required. If you need help with grouting click here to get detailed instructions.
This project is suitable for indoor use only and not in direct sunlight.
Legal Disclaimer: No warranty is implied by these instructions. Use at your own risk. The Mosaic Store and its proprietors are not responsible for the results of any actions taken on the basis of this information, nor for any omission in the advice. Please wear appropriate safety equipment when cutting mosaic materials and using grouts and adhesives. Keep out of reach of children.